Fix the thread on the Meteor Blade Mount

Sometimes the blade mount thread on the Meteor 250 gets short because the nut has bound up on the thread when tightening the blade and the bolt disappears up inside the coupling.

This makes the thread look like it has broken or worn out. The good news is it is just a high grade M14 bolt and all you need to do is disassemble the coupling and re tighten it.

In this video, we show you how to fix this easily with a 6mm Wrench and a 22mm socket on a torque wrench and a bench vice.

Please note that the best torque of the bolt should be 140Nm

Back to “How To”