SuprSheen Premium Guard 20L

$1,049.80 + GST

SuprSheen Premium Guard 20L (Water Based)

In stock (can be backordered)

SKU: SUPR-PG20 Category:

SuprSheen® Premium Guard is a premium water based sealer that is applied in the final stages of polishing.

Application:

SuprSheen® Premium Lithium is a solution to harden & densify concrete in the polished concrete industry.

Application:
Do not apply in temperatures below 5oC or above 30oC

  1. Apply by pump up sprayer and/or micro-fibre mop to the surface, at approximately 5m² per litre. Maintain a “wet edge” at all times.
  2. Product should penetrate the concrete within 10 -20 minutes, ensure all puddling is removed.
  3. Allow to cure for 8- 12h, then proceed with the polishing process.
  4. If the concrete is seen to be unusually porous during the #100 or #200 stages, repeat the process.

Safety Directions:
Avoid contact with skin and eyes. Do not mix with other chemicals.

Spills and leaks:
Absorb with sand/soil and recover into a steel drum. Dispose in compliance with local government bylaws. The affected area should be hosed down with water. Refer to MSDS material safety data sheet for further information.

First Aid:
For advice, contact your local poisons information centre. Phone AU: 13 11 26 NZ:03 474 7000 or seek medical attention or doctor. If swallowed, do NOT induce vomiting. If skin or hair contact occurs, remove contaminated clothing and flush skin with running water.

Application:
Do not apply in temperatures below 5oC or above 30oC

  1. Apply by pump up sprayer and/or micro-fibre mop to the surface, at approximately 5m² per litre. Maintain a “wet edge” at all times.
  2. Product should penetrate the concrete within 10 -20 minutes, ensure all puddling is removed.
  3. Allow to cure for 8- 12h, then proceed with the polishing process.
  4. If the concrete is seen to be unusually porous during the #100 or #200 stages, repeat the process.

Coverage:
On dense surfaces, expect 10-15m²/L, and on more porous surfaces 1-2m²/L

Clean Up:
Clean brooms, tools, all equipment and sprayers with water immediately after use.

Maintenance:
For ongoing maintenance regime use a neutral low residue cleaner, which can be applied by mop.

Caution:
Protect metals, glass, wood, paint, or brick from contact with Lithium. If over sprayed, wash surface with potable water IMMEDIATELY.

Do not apply in temperatures below 5°C or above 30°C

  • Surface to be treated should be clean and dry.
  • Apply by pump up sprayer and/or micro-fibre mop to the surface. Apply as thinly as possible.
  • Allow to cure for 8- 12h, then the surface may be buffed.

Safety Directions:

Avoid contact with skin and eyes. Do not mix with other chemicals

Spills and leaks:

Absorb with sand/soil and recover into a steel drum. Dispose in compliance with local government bylaws. The affected area should be hosed down with water. Refer to MSDS material safety data sheet for further information.

First Aid:

For advice, contact your local poisons information centre. Phone AU: 13 11 26 NZ:03 474 7000 or seek medical attention or a doctor. If swallowed, do NOT induce vomiting. If skin or hair contact occurs, remove contaminated clothing and flush skin with running water.

Coverage:

On dense surfaces, expect 10-12m²/L, and on more porous surfaces 1-2m²/L

Clean Up:

Clean all equipment and sprayers with water immediately after use.

Maintenance:

For ongoing maintenance regime use a neutral low residue cleaner, which can be applied by mop.

Caution:

Protect raw aluminium and glass from contact with Premium Guard. If over sprayed, wash surface with potable water IMMEDIATELY.

Product Range

,

Reviews

There are no reviews yet.

Be the first to review “SuprSheen Premium Guard 20L”