SuprSheen® Premium Guard is a premium water based sealer that is applied in the final stages of polishing.
Do not apply in temperatures below 5°C or above 30°C
- Surface to be treated should be clean and dry.
- Apply by pump up sprayer and/or micro-fibre mop to the surface.
- Apply as thinly as possible.
- Allow to cure for 8- 12h, then the surface may be buffed.
Avoid contact with skin and eyes. Do not mix with other chemicals
Spills and leaks:
Absorb with sand/soil and recover into a steel drum. Dispose in compliance with local government bylaws. The affected area should be hosed down with water. Refer to MSDS material safety data sheet for further information.
For advice, contact your local poisons information centre. Phone AU: 13 11 26 NZ:03 474 7000 or seek medical attention or a doctor. If swallowed, do NOT induce vomiting. If skin or hair contact occurs, remove contaminated clothing and flush skin with running water.
On dense surfaces, expect 10-12m²/L, and on more porous surfaces 1-2m²/L
Clean all equipment and sprayers with water immediately after use.
For ongoing maintenance regime use a neutral low residue cleaner, which can be applied by mop.
Protect raw aluminium and glass from contact with Premium Guard. If over sprayed, wash surface with potable water IMMEDIATELY.