SuprSheen® is a solvent based sealer to deliver the ultimate final seal
for polished concrete.
Do not apply in temperatures below 10°C or above 30°C
- Surface to be treated should be clean and dry.
- Apply by pump up sprayer and/or micro-fibre mop to the surface. Apply as thinly as possible.
- Allow to cure for 6-8h, then the surface may be buffed.
Do not mix with other chemicals. Do not smoke when using, avoid naked flames and ensure adequate ventilation exists during application. Wear personal protection consisting of goggles, gloves, and a face mask. Avoid contact with skin and eyes.
Spills and leaks:
Absorb with sand/soil and recover into a steel drum. Dispose in compliance with local government bylaws. The affected area can be cleaned with mineral turpentine. Refer to MSDS material safety data sheet for further information.
For advice, contact your local poisons information centre. Phone AU: 13 11 26 NZ:03 474 7000 or seek medical attention or doctor. If swallowed, do NOT induce vomiting. If skin or hair contact occurs, remove contaminated clothing and flush skin with soap and water.
Clean equipment with mineral turpentine while uncured. Refer to product data sheet for detailed information.