SuprSheen Ultra Lithium 20L

SuprSheen^® Ultra Lithium is a solution to harden & densify concrete in the polished concrete industry.

Application:
Do not apply in temperatures below 5°C or above 30°C

1. Use as a premium densifier, or second coat application.
2. Apply by pump up sprayer and/or micro-fibre mop to the surface, at approximately 5m² per litre. Maintain a “wet edge” at all times.
3. Product should penetrate the concrete within 10 -20 minutes, ensure all puddling is removed.
4. Allow to cure for 8- 12h, then proceed with the polishing process.

Safety Directions:
Avoid contact with skin and eyes. Do not mix with other chemicals.

Spills and leaks:
Absorb with sand/soil and recover into a steel drum. Dispose in compliance with local government bylaws. The affected area should be hosed down with water. Refer to MSDS material safety data sheet for further information.

First Aid:
For advice, contact your local poisons information centre. Phone AU: 13 11 26 NZ:03 474 7000 or seek medical attention or doctor. If swallowed, do NOT induce vomiting. If skin or hair contact occurs, remove contaminated clothing and flush skin with running water.

Coverage:
On dense surfaces, expect 10-15m²/L, and on more porous surfaces 1-2m²/L

Clean Up:
Clean brooms, tools, all equipment and sprayers with water immediately after use.

Maintenance:
For ongoing maintenance regime use a neutral low residue cleaner, which can be applied by mop.

Caution:
Protect metals, glass, wood, paint, or brick from contact with Lithium. If over sprayed, wash surface with potable water IMMEDIATELY.